Products

Blade Length: 2921mm (115″) Blade Width: 6mm (1/4″) Teeth per Inch: 6 For use with Charnwood C14BX Suitable for: All types of Wood Made In Great B...

Pack of 5 Sand paper rolls for use with a drum sander. The rolls have a pre-cut taper on each end, ready for winding onto the drum. Roll Width ...

Fitting neatly into the gap between the heaviest router table and an industrial sized spindle moulder this machine is ideally suited to small profe...

W030P Spindle Moulder Package Deal Includes: W030 Spindle Moulder with Sliding carriage CB9830 Cutterblock with Straight Knives& 6 Profiles W03...

The complete scroll saw package, with a powerful DC motor allowing electronic variable speed control and a foot pedal switch to allow the operator...

Traditional 4 pronged Drive Centre with spring loaded locating pin. Diameter of Head 16mm (5/8″) Total Length 93mm No.1 Morse Taper

Pack of 5 Sand paper rolls for use with a drum sander. The rolls have a pre-cut taper on each end, ready for winding onto the drum. Roll Width ...

The W796 is a portable dust and chip extractor aimed at the professional workshop needing to extract from one machine at a time. Professional Qual...

Pack of 5 Sand paper rolls for use with a drum sander. The rolls have a pre-cut taper on each end, ready for winding onto the drum. Roll Width ...

Optional attachment for W685 Dust Extractor. The Kit consists of a 3m length of 100mm diameter flexible hose, a dust hood and a support arm that ca...

Turn spindles without removing your chuck from the lathe using this chuck drive centre. The sharp point in the centre is spring loaded and retracts...

1 Morse Taper Crown Drive Centre. Our Crown centres feature a set of sharp teeth that bite into the wood to give a more secure hold than traditiona...

2 Morse Taper Crown Drive Centre.Our Crown centres feature a set of sharp teeth that bite into the wood to give a more secure hold than traditi...

A powerful professional dust extractor with ample flow rate to extract from two machines at the same time. Quiet Induction Motor Up to 8 hours Con...

Charnwood 3 Inlet Fitting Connection for Hosing. Specification: x3 Inlet (100mm) x1 Outlet (150mm)

Professional quality chisel and bit set, Imperial 3/4" size with a 3/4" chisel shank for mounting into the hollow chisel morticer. Auger bit with ...

Professional quality chisel and bit set, Imperial 3/8" size with a 3/4" chisel shank for mounting into the hollow chisel morticer. Auger bit with ...

The biggest dust extractor in the Charnwood professional range with two large collection bags to run for longer times between emptying. Quiet Indu...

The biggest dust extractor in the Charnwood professional range with two large collection bags to run for longer times between emptying. Three Phas...

Turn spindles without removing your chuck from the lathe using this four prong drive centre. The centre point insert is removable and can be replac...

Used to adapt older machinery which did not originally have extraction points fitted or to make collection funnels for other types of machinery suc...

4 Piece Hollow Chisel & Auger Bit Set. A set of 4 imperial sized mortice chisels, with full length windows for fast chip ejection. Supplied in ...

High quality sanding discs, European manufacture. Pack of 5, self adhesive backing, diameter 125mm (5") , 80 grit. For use with Charnwood BD15, or ...

Professional quality chisel and bit set, Imperial 5/8" size with a 3/4" chisel shank for mounting into the hollow chisel morticer. Auger bit with ...

Pack of 5 Replacement outer filter bags. A thick paper based filter bag which sits over the outside of the cartridge filter to protect it from flyi...

High filtration vacuum extractor. Filters Down to 0.5 Microns 50 Litre Collection Capacity No Loss of Power with Small Diameter Hoses 2 Metre Leng...

High filtration vacuum extractor with auto start function. A great time saving feature, perfect for using with tools which make frequent small cuts...

The Charnwood 9'' sanding discs are High Quality English made. Complete in a pack of 5, these self adhesive backing discs have a diameter of 225mm ...

The Charnwood 9'' sanding discs are High Quality English made. Complete in a pack of 5, these self adhesive backing discs have a diameter of 225mm ...

The Charnwood 9'' sanding discs are High Quality English made. Complete in a pack of 5, these self adhesive backing discs have a diameter of 225mm ...

A heavy duty workshop sander, with the traditional combination of belt and disc, driven via belt by a quiet 1hp induction motor. The large diameter...

The most popular sized combination sander for the home workshop. 450w Quiet Induction Motor  6" Diameter Sanding Disc 4" x 36" Sanding Belt Vertic...

When running hose around the workshop, it is sometimes easier to use an elbow at the corners rather than run the flexible hose around. 45 Degree E...

The Flexible Cuff is used to join two dust collection fittings with an outside diameter of  63mm. Simply tighten the hose clamps to form a semi-rig...

A set of 6 high quality short chisels.  Specially designed for working on small bench top lathes and ideal for small workpieces allowing all kinds ...

Pack of 10 high quality European made velcro backed sanding discs, diameter 75mm (3") , 120 grit. For use with Charnwood BS10 bowl sander, Axminste...