New Products

Milwaukee 4933478499 M18FH-0 M18 FUEL SDS+ Hammer (Bare Unit) The Milwaukee M18FH-0 is a Body Only SDS Plus Hammer Drill with 4-mode operation. Rot...

DeWalt DCK264P2T 18v XR 1st and 2nd Fix Nailer Twin Kit in T Stack (2X5Ah) The Dewalt DCK2046P2 XR nailer twin pack is ideal for professionals and ...

Jefferson 1/2" 15m Retractable High-Vis Reel Hybrid Hose • Retractable air hose reel with industrial casing & corrosion-resistant powder-coated...

Jefferson 15M 3/8" Auto Retracting Hose Reel (High-Vis Hose) • Air hose manufactured from a kink-resistant rubber hybrid that delivers performance,...

Milwaukee 4933478439 M18 FSAGF125XPDB-0X 18V Flathead Angle Grinder 125 mm (Bare Unit) FEATURES: Flat head design - can be used up to 42° Delivers...

VAL 6 INDUSTRIAL INFRA RED HEATER  Safer and deeper heat penetration with less intensity Far infrared ray and wide radiant heat. Becoming warm from...

PREDATOR Industrial 3000W Wet Dry Vacuum Cleaner - 230V   Our Predator DISCVAC Industrial quality Wet/Dry Vacuum Cleaner is priced very competiti...

The Faithfull FAISPRAY16K is a Service Kit containing replacement rubber washers and seals for SPRAY16.orted spray nozzles.

DEWALT Construction Circular Saw Blade for use with portable machines to cut softwoods and composite materials. The impact resistant carbide teeth ...

Milwaukee 4933479153 M18 FMTIW2F38-0 3/8" Mid Torque Wrench (Bare Unit) The Milwaukee18V cordless 3/8'' impact wrench with an industry-leading perf...

Floor standing router table with Sliding carriage Large Fence, 2 x 460mm x 150mm Two adjustable vertical hold down feather boards Adjustable horiz...

Milwaukee 4932472067 Shockwave Impact Duty 152mm Locking Bit

The Trend SNAP/HKLC/6 Keyless Chuck can be used in quick chucks and impact drivers to hold parallel shank drills bits up to 1/4 inch.Clamping capac...

Jefferson Magnetic Spray Can Holder Tray

Jefferson 6pc HSS Counter Sink Set • 90º Drill Bits• For Carbon Steel, Sheet Iron, PVC, Wood• Set includes sizes: 6.3mm, 8.3mm, 10.4mm, 12.4mm, 16....

Jefferson 1'' Outlet Filter Regulator c/w Gauge SKUJEFFR5000-10 Max. Air Flow5000L/min / 176cfm Drain Valve/Outlet Thread1" BSP Pressure Re...

SIP Hard Polishing Wheel 200 x 10 x 16mm

SIP Soft Polishing Wheel 200 x 10 x 16mm

Fine Wheel 60 Grit (250 x 25 x 20mm) for 07650

Coarse Wheel 36 Grit (250 x 25 x 20mm) for 07650

The SIP 10" Professional Bench Grinder is a must-have for any professional workshop, providing continuous performance via a heavy-duty S1 rated mo...

The SIP DDVT 3hp 100ltr V-Twin Direct Drive Compressor is a highly versatile and efficient compressor ideal for general purpose work area applicat...

WD-40® is an all-purpose liquid for displacing moisture, corrosion control, lubrication, cleaning and penetration. It has the ability to penetrate ...

WD-40 Specialist® Penetrant Spray quickly release rusted, corroded, stuck, or seized nuts, bolts, parts or fixings with ease. Working on contact, t...

WD-40 Specialist® Contact Cleaner drives out dirt, dust, oil, flux residue and moisture from sensitive electrical equipment and parts with ease. WD...

WD-40 Specialist® Silicone Spray provides long-lasting protection and lubrication to prevent rubber and plastic parts and surfaces from cracking, s...

WD-40 Specialist® Dry Lubricant with PTFE is an anti-friction lubricant that excels in dry and dusty environments, with no oily residue. WD-40 Spec...

WD-40 Specialist® Degreaser is an industrial strength degreaser and cleaner that works immediately on contact to break down and remove stubborn and...

WD-40 Specialist® Spray Grease is a long-lasting, multi-purpose grease in a convenient spray format with excellent adhesion and sealing properties....

WD-40® Specialist White Lithium Grease provides excellent lubrication and corrosion protection where there is heavy metal-on-metal contact, helping...

WD-40 Specialist® Cutting Oil provides critical lubrication and protection in metalworking to maximise the life of cutting and drilling equipment, ...

Genfitt 350 Lumen Full Vision LED Headlamp Super Bright 350 Lumen with 5 light modes 10W COB & XPE with 3.7v 1200mah rechargeable battery ...

Genfitt 2'' Metal Strainer (50mm) Specification: Slurry suction hose strainer With hosetail This strainer will protect your pump from oversiz...

Genfitt 2'' Hose Joiner (50mm) Slurry hose joiner Straight hose joiner for assembling two hoses together using suitable bolt type hose clips Fini...

Genfitt Inlet Kit for Power Washers Inlet Kit Fittings These Inlet Kit Fittings can be used on products G19791 & G19792. Comes with a black p...

Genfitt 3/4'' Pressure Washer Suction Kit (3M) Pressure Washer Suction Hose Check Valve Kit This suction hose fill kit comes in two sizes- ...

Genfitt 1/2'' Pressure Washer Suction Kit (3M) Pressure Washer Suction Hose Check Valve Kit This suction hose fill kit comes in two sizes- 1...

Genfitt 458mm Spot Sprayer Lance (3/8'' Hosetail) Replacement sprayer lance suitable for spot sprayers 3/8in hose tail Stainless steel tube

The Stanley FatMax® 1-92-980 Telescopic Sawhorse features adjustable telescopic legs, that are ideal for use on difficult and uneven surfaces. The ...

This Faithfull Mortice Gauge is made from the finest hardwood, and enhanced with brass facing plates and fittings. A nylon friction pad is fitted u...

The Faithfull LED Task Light is a compact and portable lighting solution. It has two lighting modes: 50% and 100%. Fitted with a rechargeable Li-io...

The SIP 5mtr Coiled Air Hose offers a tangle-free and kink-resistant solution for reliably transporting compressed air to a variety of different a...

The SIP 1" Petrol Water Pump is built for ultimate durability in demanding general purpose pumping applications, with a tough cast iron impeller, ...

The SIP TEMPEST PH480/150 Hot Water Electric Pressure Washer offers powerful performance in a range of professional applications, providing hot wa...

The SIP HG250 Inverter Plasma Cutter is a powerful and lightweight plasma cutter designed to accurately cut mild steel, stainless steel, aluminium...

The SIP HG2301 SYNERGIC MIG/ARC/TIG Inverter Welder is a highly versatile, lightweight, and compact machine designed with powerful IGBT inverter a...

The SIP 8" x 2" Bench Grinder / Linisher is a dual process metalwork machine ideal for grinding, shaping and smoothing metal workpieces. It's also...

The SIP 15" Swivel Head Manual & Auto-Cut Metal Bandsaw is a powerful and accurate auto-cutting bandsaw ideal for cutting bar, tube and pr...